TD 92372GB
2007-06-18/ Ver. E
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway
38
7.2.3 Dynamic IP address via DHCP
The Slaves can have dynamic IP address allocation if the network has an DHCP server.
1 Select LAN > DHCP.
2 Select “Client” in the Mode drop-down list.
3 Click “OK”.
4 Reset in order to make the changes take effect, see 7.12 Reset on page 60.
7.2.4 Link
The link setting should be set to "auto" under all normal circumstances.
7.2.5 Configure VLAN
Identity and priority settings for VLAN are done in the "LAN > VLAN" sub menu.
Note: It is necessary to have a VLAN with the same ID as configured in the IPBS/IPBL
otherwise it will not be possible to access the IPBS/IPBL.
7.2.6 View LAN Statistics
To view statistics of LAN events: Select LAN > Statistics
To reset the ethernet statistics counters: Click the clear-stat button.
To Next Page
Loading...
