ashtech DG16 - Page 112

92 DG14 and DG16 Board & Sensor Reference Manual
Satellite
Tracking
Parameters
$PASHS,UTS Synchronize measurements and
coordinates with GPS system time
Off 179
$PASHS,SUI Enable satellite usage indicator Off 159
$PASHS,SVP Set satellites for position computation Y 161
$PASHQ,SVP Query satellites in position
computation
— 161
$PASHS,SVS Set satellites for acquisition and
tracking
Y 162
$PASHQ,SVS Query satellites for acquisition and
tracking
— 162
$PASHS,USE Designate individual satellites for
tracking
All 178
$PASHS,USE,ALL Include/exclude all satellites for
tracking
All 179
$PASHS,USP Designate individual satellites to be
used in position computation
All 179
$PASHQ,STA Query for currently locked satellites — 159
$PASHQ,UTS Query time synchronization — 180
$PASHQ,VIS Query for visible satellites — 180
Position
Computation
$PASHS,CRR Set type of code correlator Edge 99
$PASHQ,CRR Query code correlator setting — 101
$PASHS,ERM Set error masks for position
computations
AUT: 600, 1200
DIF: 30, 60
112
$PASHS,FIX Set fixed altitude mode 0 114
$PASHS,PEM Set elevation mask for position
computation
5° 137
$PASHS,PMD Set position computation mode 1 138
$PASHS,PPO Enable/disable point positioning — 143
$PASHQ,PPR Query position parameters — 143
$PASHS,SCM Set smoothing counter mask Off 152
$PASHQ,SCM Query smoothing counter mask — 152
$PASHS,SEM Set secondary elevation mask Off 153
Table 6.3. Receiver Commands (Continued)
Function Command Description Default Page