C450HD IP Phone
User's Manual 68 Document #: LTRT-13261
5.14.2 Adding a Contact to the Personal Directory
The home number, office number, mobile number and/or SIP URI of a contact can be added to
the Personal Directory. You can also configure a speed dial to place calls quickly to the contact
(see Section 5.16). After adding the contact, you can search for them in the group, dial them, edit
their contact information or delete them.
Note: You can add a maximum of 1,000 contacts to your Personal Directory. After adding a
contact, you can call the contact directly from the directory. If you receive an incoming call
from a contact listed in the directory, the touch screen displays the name listed.
To add a contact to the Personal Directory:
1. Open the Personal Directory (CONTACTS key > Groups softkey > Personal Directory) and
select New Contact.
2. In the 'Modify Contact' screen, key in the ‘Name’ of the new contact (see Section 3.4 for
detailed instructions).
3. Navigate down and key in the new contact's office phone number (see Section 3.4 for
detailed instructions).
4. Optionally, navigate down and key in the new contact's home and mobile numbers as well.
5. Optionally, navigate down and enter the contact's SIP URI, e.g.,
mike.dubb@audiocodes.com.
This option is useful if you don't know their phone number.
6. Touch the Sp. Dial softkey to assign a speed dial key if required:
7. Optionally, touch the Select softkey; a speed dial key is assigned to the contact.
8. Touch the Save softkey; 'Contact Saved' is displayed.
9. To view the assigned speed dial, navigate down to the contact's name and touch the Details
softkey:
To Next Page
Loading...
