User's Manual 5. Customizing Your Phone
79 C450HD IP Phone
4. Touch the Save softkey; the touch screen reverts to idle mode displaying the name of the
contact you configured ('Hilary', in this example):
5. To determine presence status, refer to the figure below. In the figure above, Hilary’s
presence status is 'Available'.
6. To quickly place a call, touch Hilary in the idle screen; the number is dialed. See Section 7.4
for more information.
5.16.1 Configuring Pause Dialing for a Speed Dial to an Ext. behind an IVR
Your network administrator can configure pause dialing for a Speed Dial, in order to create a time
break. This is typically requried for a Speed Dial which dials a destination extension number that
is behind an Interactive Voice Response (IVR) system.
Note: Consult your network administrator if you need a pause dialing configured for a Speed
Dial. See the Administrator's Manual for more information.
To Next Page
Loading...
