User's Manual 5. Customizing Your Phone
85 C450HD IP Phone
5.19 Configuring a Function Key for Direct Voice Dialing
The phone is directly integrated with AudioCodes' Voca services to allow voice dialing to any
other user in same corporate directory. To enable the service, the user must add a VocaNOM
function key.
Note: The network administrator must enable the feature and configure the VocaNOM
IP address service on the phone for the Function Key to be activated. See the
Administrator's Manual for more information.
VocaNOM allows voice-dialing colleagues by touching the VocaNOM key in the phone's idle
screen or in the Expansion Unit screen. A beep is played and then a voice prompt requests first
and last name or department. The caller articulates the first and last name and then at the
prompt, articulates "Office" or "Mobile". The VocaNOM service then directly dials the requested
party according to the instructions articulated by the user.
When the service identifies the requested party, the phone dials their number just as it does in a
regular call. Later, the user can press the REDIAL hard key on the phone and view the call
logged in the phone's 'Dialed Calls' just like with any other call.
The VocaNOM voice-dialing feature increases day-to-day work productivity.
To configure a Function Key for direct voice dialing:
1. Open the Function Keys screen (press the MENU hard key and then touch the Keys option)
and then select any of the 'Empty' 1-8 Function Keys.
2. Touch < or > to navigate to and select Voca and then make sure the key is displayed in the
idle screen and that it is active. If it isn’t active, consult your network administrator.
To Next Page
Loading...
