C450HD IP Phone
User's Manual 86 Document #: LTRT-13261
5.20 Configuring a Function Key for Paging
Live announcements can be made (paged) from a phone to a group of phones, to notify a team
(for example) that a meeting is about to commence. The paged announcement is multicast via a
designated group IP address, in real time, on all idle phones in the group, without requiring
listeners to pick up their receivers. The name of the group is displayed on phone screens when
the paging call comes in.
Note: The feature must be enabled in the Web interface by the network administrator before a
Function Key can be configured for paging. See the Administrator's Manual for more
information.
To configure a paging dial:
1. Open the Function Keys screen (press the MENU hard key and then touch the Keys
option -or- in the idle screen touch the … icon):
2. Select an 'Empty' key (if you accessed the screen from the MENU hard key) you'll see this
screen:
3. Touch < or > to navigate to and select Paging and then touch the Select softkey; the
‘Function key #n’ screen opens.
To Next Page
Loading...
