Autronica Autro Safe User Manual

Dual Safety Installation
Installation Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-INSTALL/DGB Rev. I, 2014-04-01,
Autronica Fire and Security AS
Page 54
11.2.1 Example 1: Connections Using AL_Com+ only
The distance from the Primary Panel to the Loop Driver Module is less
than 3 meters. An AL_Com+ flat ribbon cable is used between the
panel AL_Com port and the I/O stack (including the Loop Driver
Module).
The distance from the Secondary Panel to the Secondary Loop Driver
Module is less than 3 meters. An AL_Com+ flat ribbon cable is used
between the panel AL_Com port and the I/O stack (including the
Secondary Loop Driver Module).

Autronica Autro Safe Specifications

General

Brand	Autronica
Model	Autro Safe
Category	Smoke Alarm
Language	English