Autronica Autro Safe User Manual

Appendix B - Power Supply
Installation Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-INSTALL/DGB Rev. I, 2014-04-01,
Autronica Fire and Security AS
Page 75
15. Appendix B - Power Supply
15.1 Power Cabinet and Power Units
AutroSafe 4 provides the following power cabinet and power units:
 Power Cabinet BP-405
 Power Unit BPS-405
 Power Unit BPS-410
15.1.1 Power Cabinet BP-405
The Power Cabinet BP-405 contains the following:
 24V/5A power supply (BPS-405, Meanwell Power Supply)
 Power Board BSF-400, including:
 AutroFieldBus interface
 115VAC /230VAC input
 6 outputs 24VDC (max. 2A each)
 1 fault relay output
 2x12V, 18Ah batteries
For detailed information, refer to this chapter (Power Supply) and
datasheet.
15.1.2 Power Unit BPS-405
The Power Unit BPS-405 contains the following:
 24V/5A power supply
 Power Board BSF-400, including:
 AutroFieldBus interface
 115VAC /230VAC input
 6 outputs 24VDC (max. 2A each)
 1 fault relay output
For detailed information, refer to this chapter (Power Supply) and
datasheet.
15.1.3 Power Unit BPS-410
Note:
The BPS-410 Power Unit 24VDC/10A is delivered as two separate
part numbers:
 116-BPS-410 for 230VAC
 116-BPS-410/115 for 115VAC
The Power Unit BPS-410 contains the following:
 24V/10A power supply
 Power Board BSF-400, including:
 AutroFieldBus interface
 115VAC or 230VAC input
 6 outputs 24VDC (max. 2A each)
 1 fault relay output
For detailed information, refer to this chapter (Power Supply) and
datasheet.

Autronica Autro Safe Specifications

General

Brand	Autronica
Model	Autro Safe
Category	Smoke Alarm
Language	English