Logins
Issue 4.1 June 2005 101
Terminal Emulation: To use a command line interface in a terminal emulation window open
your terminal emulation application. The terminal emulation program port settings must be
configured as follows:
● 115200 baud
● No parity
● 8 data bits
● 1 stop bit
● No flow control
Note:
Note: Avaya Native Configuration Manager, Avaya Terminal Emulation, and
HyperTerminal are the only terminal emulation programs supported.
Establish a network connection to the active media server using either the IP address or the
DNS host name. Use port 5023 for this connection. (SAT commands are usable only on the
active media server.) When prompted, log in.
Logins
Initial configuration and upgrades by an Avaya field tech or business partner requires a services
login, such as craft or dadmin. If an Avaya field tech, you can use a unique password assigned
to that customer’s system.
After installing the Avaya authentication file, Avaya Communication Manager has a password
for the craft login that is unique to the customer’s system and available when connected directly
to the media server. To bypass the ASG challenge and response, use this password the next
time you log in as craft. Every other means of craft access still require an ASG challenge and
response. The revised password is recorded by RFA and is obtained from ASG Conversant at
1-800-248-1234 or 1-720-444-5557.
Customer’s can set up their own logins for accessing Avaya’s media servers. See the Avaya
Communication Manager Basic Administration Quick Reference (03-300363) for specific
information. You must have superuser permission to create or change logins and passwords.
Note:
Note: When assigning login IDs, do not start them with a number.
To Next Page
Loading...
Need help?
General
