Avaya S8100 Series Installing And Configuring

Translating the IPSIs
56 Installing and Configuring the Avaya S8700 Series Media Server
Enabling IPSI duplication (duplicated control network only)
Enabling IPSI duplication requires that all IPSI-connected port networks have both primary
(CNA) and secondary (CNB) IPSI circuit packs. Disabling IPSI duplication requires that all
primary IPSI circuit packs be active.
These steps enable IPSI duplication.
1. Type change system-parameters duplication and press Enter.
2. Set the Enable Operation of IPSI Duplication? field to y.
3. Press Enter to effect the changes.
Setting alarm activation level
These steps set the alarm activation level.
1. Type change system-parameters maintenance and press Enter.
2. In the CPE Alarm Activation Level field, select none (default), warning, minor, or
major, depending on the level the customer wants and press Enter to effect the changes.
3. Repeat for each IPSI.
Installing the translation file
This step installs the translation file.
1. Type save translation and press Enter to save the translations to the hard drive.
change system-parameters maintenance Page 1 of 3
MAINTENANCE-RELATED SYSTEM PARAMETERS
OPERATIONS SUPPORT PARAMETERS
CPE Alarm Activation Level: none
SCHEDULED MAINTENANCE
Start Time: 22 : 00
Stop Time: 06 : 00
Save Translation: daily
Update LSPs When Saving Translations: y
Command Time-out (hours): 2
Control Channel Interchange: no
System Clocks/IPSI Interchange: no

Avaya S8100 Series Specifications

General

Brand	Avaya
Model	S8100 Series
Category	Server
Language	English