Translating the IPSIs
52 Installing and Configuring the Avaya S8700 Series Media Server
● No flow control
● 5023 for the port
3. Log into the media server as craft.
Inputting translations
Contact the installation personnel responsible for translation input to download the translations.
This step downloads the translations.
1. Type save translation and press Enter to save the translations to the hard drive.
If the translations are not ready, you may continue with the process, entering minimal
translations to verify connectivity to the port networks.
Resetting the media server
Note:
Note: Do not reset the media server if no translations were input or if they were not
entered in bulk.
This step resets the media server.
1. Type reset system 4 and press Enter to have the software read the copied translations.
Adding media gateways
Note:
Note: Do this procedure only if the translations were not input earlier.
Note:
Note: A cabinet is defined as up to 5 G650 Media Gateways mounted in a rack and
TDM-connected or 1 MCC1 Media Gateway.
To Next Page
Loading...
Need help?
General
