Completing the installation administration
80 Installing and Configuring the Avaya S8700 Series Media Server
4. Type almenable and press Enter.
Verify that the SNMP alarm origination is enabled. If used, verify that alarm origination via
modem is still enabled.
5. Log off.
To INADS on second server
These steps enable alarming to INADS on the second server:
1. Connect to the second media server
2. Repeat Telneting to media server
on page 79 through Enabling alarms on page 79 on the
second server.
Registering the system
Follow the existing process and procedures to register the media server.
Before leaving the site
Let customers know what the default LAN security settings are; they may want to change them
after installation. Make sure they are aware that if the following items are not enabled, they will
not have remote access to the media server:
● telnet—no Telnet access
● https—no Maintenance Web Interface access
● def-sat—no SAT command access
To Next Page
Loading...
Need help?
General
