Avaya S8100 Series Installing And Configuring

Issue 4.1 June 2005 51
Chapter 4: Translating the IPSIs
These steps are done by issuing SAT commands on a terminal emulation program such as
Avaya Native Configuration Manager, Avaya Terminal Emulation, or HyperTerminal. You also
can use Avaya Site Administration, part of the Avaya Integrated Management suite, which you
can purchase from Avaya.
Note:
Note: You must use Release 2.1, update 1, or a later version of Avaya Site
Administration to administer new features in Release 3.0 of Avaya
Communication Manager.
Note:
Note: For SAT commands you must be on the active media server.
Perform these tasks to customize the media server:
● Starting terminal emulation on page 51
● Inputting translations on page 52
● Resetting the media server on page 52
● Adding media gateways on page 52
● Administering the IPSIs on page 53
Starting terminal emulation
Note:
Note: Avaya Native Configuration Manager, Avaya Terminal Emulation, and
HyperTerminal are supported terminal emulation applications.
These steps start terminal emulation.
1. On the services laptop, open a VT-100 terminal emulation session.
2. Administer the terminal emulation port settings:
● 9600 baud
● No parity
● 8 data bits
● 1 stop bit

Avaya S8100 Series Specifications

General

Brand	Avaya
Model	S8100 Series
Category	Server
Language	English