Configuring the media server
Issue 4.1 June 2005 45
Using the Installation Wizard
You can configure the media server and install the license, Avaya authentication files, and
software updates automatically using the Avaya Installation Wizard. You can do it two ways:
● You can import the data from the filled-out Electronic Preinstallation Worksheet (EPW).
● You can also type in the information manually using the filled-out EPW as a guide.
Note:
Note: You can install the license file without being physically connected to the reference
IPSI. However, you have only 30 minutes before it checks the serial number on
the IPSI. To get another 30 minutes, you can restart the clock by restarting the
media server. In a SAT session, type reset system 1.
1. Launch the Web browser.
2. Enter 192.11.13.6 and press Enter to bring up the login Web page.
3. Log in as craft and use the initial craft password.
4. Click Launch Avaya Installation Wizard.
5. Follow the Wizard prompts, using Help on each page for more information.
The SAMP software may need to be updated, depending on the currently installed version. The
versions that require updates should be included in your project planning information.
To Next Page
Loading...
Need help?
General
