Parameter Type Default value Is set to
default on
reset
Description
Valid values are from 0 to 9, and null string
(“”). If long distance access code is not
required, set the value to “”
PHNDPLENGTH String Null string Yes Specifies the length of internal extension
numbers. The value must match the
extension length set on the call server.
The valid range is from 3 to 13.
PHNLDLENGTH String Null string Yes Specifies the length of national phone
numbers of the country that is considered
in the dial plan.
Valid values are from 5 to 15.
PHNOL String Null string Yes Specifies the outside line access code,
which is the number you press to access
an external line.
The value can be of 0 to 2 characters in
length. The allowed characters are 0-9, *,
and #.
APPLY_DIALINGR
ULES_TO_PLUS_
NUMBERS
Numeric 0 Yes Specifies whether to apply dialing rules on
phone numbers with the plus sign (+) at the
beginning.
Assign one of the following values:
• 0: To ignore the dialing rules for phone
numbers that begin with the plus sign (+).
• 1: To replace the plus sign (+) with dial
plan digits.
Whenever possible, configure the plus (+)
dialing option in Session Manager instead
of enabling this parameter.
AUTOAPPLY_ARS
_TO_SHORTNUM
BERS
Numeric 1 Yes Specifies whether to disable the dialing
rules logic that automatically appends the
outside line access code (PHNOL) to
numbers that are shorter than the shortest
extension length.
Assign one of the following values:
• 0: To disable the logic. The PHNOL code
is not appended to numbers that are
shorter than the shortest extension
length.
Table continues…
Supported configuration parameters
May 2018 Installing and Administering Avaya Vantage
™
150
Comments on this document? infodev@avaya.com
To Next Page
Loading...
