Reference
Envision EX5000 -92- 600-00151-001 Rev 01
5) When the operation is complete, the CMax Dataloader will restart
the EX5000.
6) At this point, turn off the power to the EX500, remove your USB
FLash Memory Drive or Zip Drive, and then turn the EX5000
power back on.
This step ensures that all data has been checked in self-test and
the MFD is ready to use.
7) Confirm the valid dates of the Chart data as reported on the
Startup Screen.
8) Go to the Chart page and select a chart from an airport known to
be in your subscriptions coverage area. Confirm that the chart is
available.
9) Store the Zip Drive and cable or USB Flash Memory Drive in a
safe place.
To Next Page
