CMax Chart Pages (Optional)
Envision EX5000 -40- 600-00151-001 Rev 01
3) Day/Night—Toggles the chart display between Day and Night
modes. Day mode displays black text on a white background;
Night mode is white text on a black background. Other colors
such as water or shaded terrain are also adjusted for Day or
Night mode. The EX5000 starts in Night mode to preserve night
vision.
4) Flight Plan—Toggles the display of the flight plan overlay on the
chart Plan View between DISPLAY and DSPLY OFF. Changes to
this selection are effective immediately.
5) Back to Active—Returns to the current active chart display
screen. Any inputs to the Airport Entry Field or Chart list are
abandoned. Changes to flight plan display status, however, are
preserved.
6) Change Airport—Moves the cursor to the Airport Entry field,
described in Section 3.8, "Selecting an Airport" on page 41.
7) Display Chart—Loads the selected chart and displays it on the
Chart page. Remember that the associated Airport diagram is
also automatically made available on the Chart page when a
procedure chart is loaded by pressing Display Chart.
Note: As a valid chart, the Airport diagram is listed in the Chart Selection
list, however, it is not usually necessary to load the Airport chart, since it is
always accessible on the Chart page by pressing the Display Airport button.
To Next Page
Loading...
