Avidyne Envision EX5000 - Page 86

Aux Page – Configuring the EX5000
Envision EX5000 -74- 600-00151-001 Rev 01
lines with valid data. The data block disappears if all lines are set
to BLANK.
For information on the fields available in the data blocks, see
Section 9.7, "Data Blocks" on page 103.”
3) Save—Saves settings and returns to the Aux Main page.
4) Cancel—Cancels any changes and returns to Aux Main page.
5) Change knob—The left knob changes the value or status of the
selected field.
6) Select knob—The right knob moves the green field selector.