Avigilon ALTA Core Series User Manual

Revisions
Guide Description
Rev 2.9 Core Series Smart Hub (SYS-4ENT-DVE1, SYS-ELEV-SVE1, SYS-8ENT-DVE2, SYS-8ENT-
DVE4, SYS-16ENT-DVE6) and Access Control Core (OP-CR-ACC) updates:
For more information on page9, Mounting options on page12, Install the Core Series
boards in E1 enclosure on page15, Install the Core Series boards in E2 enclosure on
page18, Install the Core Series boards in E4 enclosure on page20, Install the Core Series
boards in E6 enclosure on page22
Wiring the Core Series 12/24V 4-Door Smart Hub on page45, Wiring the Core Series 24V
Elevator Smart Hub on page46, Wiring the Core Series 12/24V 8-Door Smart Hub on
page47, Wiring the Core Series 12/24 8-Door Large Smart Hub on page48, Wiring the Core
Series 12/24 16-Door Large Smart Hub on page50, Power, Relay, Status, and Board ID LEDs
on page57
Appendix: Best practices - Wiring a REX to your Avigilon Alta access control system on
page69, FCC on page72, IC RSS-102 on page75, Electrical specifications on page77
Rev. 2.8 Reader updates: Install the Smart Reader v2 on page26, Install the Smart Keypad Reader
on page28, Install the Embedded USB Smart Reader on page31, Regulatory on page72
Rev. 2.7 Enable Static Cloud IP field: Add one ACU on page62, Disable the Static Cloud IP
connection on page63
Revisions 3

Avigilon ALTA Core Series Specifications

General

Brand	Avigilon
Model	ALTA Core Series
Category	IP Access Controllers
Language	English