OP-R2X-EMBD: FCC ID:2APJVOPR2LHF
OP-R2X-MULL: FCCID:2APJVOPR2LHF
OP-R2X-STND: FCC ID:2APJVOPR2LHF
OP-RKP-MULL: FCC ID:2APJVOPRKPM
OP-RKP-STND: FCC ID:2APJVOPRKP
OP-VID-PRO-INT: FCC ID:2APJVOPVNRC
OP-VID-PRO-RDR: FCC ID:2APJVOPVRC
OP-2ESH-POE: FCC ID:2APJV2ESH
OP-4ESH-24V; FCC ID:2ABCB-RPI3B
SYS-4ENT-DVE1: FCC ID:2ABCB-RPI4B
SYS-8ENT-DVE2: FCC ID:2ABCB-RPI4B
SYS-8ENT-DVE4: FCC ID:2ABCB-RPI4B
SYS-16ENT-DVE6: FCC ID:2ABCB-RPI4B
SYS-ELEV-SVE1: FCC ID:2ABCB-RPI4B
4ENT-SYS-1224V: Contains FCC ID:2ABCB-RPI3B
4ENT-SYS-24V: Contains FCC ID:2ABCB-RPI3B
8ENT-SYS-1224V: Contains FCC ID:2ABCB-RPI3B
20ENT-SYS-24V: Contains FCC ID:2ABCB-RPI3B
IEC 62368-1
l
This equipment is intended only for use in a restricted access area.
l
Securely fasten the equipment according to LifeSafety Power mounting instructions. See FlexPower
Vantage Standard Power System - Installation Manual
1
.
l
PROTECTIVE EARTHING: For safety, the Smart Hub must only be plugged into a grounded 3-prong outlet,
wired with a minimum of 16 gauge wire to ground.
1
See https://lifesafetypower.com/docs/im_fpv-standard.pdf.
Regulatory 73
To Next Page
Loading...
Need help?
General