Status LED Description
Center dot is flashing red. Internal error.
Add ACUs using Alta Control Center
Before you can provision an ACU using the Open Admin app, you must first create an ACU in the Alta Control
Center.
Add multiple ACUs using Quick start option
1. Go to control.openpath.com/loginand sign in. To access the European Alta Control Center, go to
control.eu.openpath.com/login.
2. Go to Administration > Quick start.
3. Enter a Site nameand any other relevant site information.
a. In Organization language, select the preferred language for the emails sent by the system.
b. Click Next.
4. Enter the number of controllers located at your site:
a. Enter names for the controllers.
b. In Controller type, select the type used:
l
First generation - Red Board (OP-AS-01)— For first generation Smart Hubs.
l
Single Door Controller (SDC)
l
Core series ACU — For Core Series Smart Hubs.
c. If your ACU also connects to an expansion board, add the appropriate types in EXPANSION
BOARDS:
l
Openpath 4-Port Expansion
l
Openpath 8-Port Expansion
Provisioning ACUs 61
To Next Page
Loading...
Need help?
General