Surface mount
1. Attach the surface mount bracket (e) to the wall (f) using one of these options:
Drywall: Use wall anchors and suitable screws. UK single gang box: Use four machine screws (not incl).
EU single gang box: Use two machine screws (not included) in the top and bottom holes.
2. Strip and connect the wires.
3. Use the provided #8-32 screws (b) to attach the reader (c) to the surface mount bracket (e).
4. Snap on the front cover (a).
Note: Do not use adhesive.
Mullion Keypad Reader
The Mullion Smart Reader (OP-RKP-MULL) can be surface mounted where space is limited.
Installation 29
To Next Page
Loading...
Need help?
General