Provisioning ACUs
Provisioning the ACU means registering it in the Avigilon Alta Control Center and getting it up and running with
the latest firmware. You will need to re-provision in the case of a hard reset, see Resetting ACUs on page67.
Note: If you're provisioning ACUs for a customer account, the customer org needs to be created first.
Prerequisites
l
Meet all Network requirements on page11.
l
Connect the ACU to the internet via Ethernet.
l
Install the Open Admin app.
o
iOS App Store
o
Google Play™ Store
l
If using a laptop instead of the app, the laptop must be on the same network as the ACU. If you have a
VLAN, make sure the laptop is on the same VLAN as the ACU.
l
If using a laptop running Microsoft™ Windows or Linux®, you must download the iTunes app. The
provisioning process uses Bonjour software that comes with iTunes. Optionally, you can download
iTunes and use an archive utility to extract and install only the Bonjour MSI.
Power, Relay, Status, and Board ID LEDs
Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
Provisioning ACUs 57
To Next Page
Loading...
Need help?
General