Avocent Cyclades ACS 5000 - Expert - Administration - Notifications

94 Cyclades ACS 5000 Installation/Administration/User Guide
To view system information:
1. Select Expert - Administration - System Information. The System Information screen appears.
2. Scroll down to see all the information.
Expert - Administration - Notifications
An administrator can select Expert - Administration - Notifications to configure alarm notifications
for system events and other events of interest that can occur on target devices connected to the
serial ports. Notifications can be sent by email, pager or SNMP trap.
To choose a method for sending notifications:
1. Select Expert - Administration - Notifications. The Notifications screen appears.
2. Enable Notification Alarm for Data Buffering by clicking the checkbox.
3. Select Email, Pager or SNMP Trap from the pull-down menu.
4. To create a new entry for an event to trigger an alarm or notification, click the Add button.
5. To edit a previously-configured trigger, click the Edit button.
CPU Information • CPU Type
• Clock Speed
• Revision
• Bogomips
Memory Information • MemTotal
• MemFree
•Buffers
• Cached
• SwapCached
•Active
• Inactive
• HighTotal
• HighFree
• LowTotal
• LowFree
• SwapTotal
• SwapFree
•Dirty
• Writeback
• Mapped
•Slab
• CommitLimit
• Committed_AS
• PageTables
•VmallocTotal
• VmallocUsed
• VmallocChunk
Ram Disk Usage • Filesystem
• 1k-blocks
•Used
•Available
•Use%
• Mounted
Table 10.2: Expert - Administration System Information Screen (Continued)
Information Parameters