Chapter 6: Web Manager Applications Menu Options 39
Applications - IPDU Power Mgmt. - Outlets Group Ctrl
An administrator can select Expert - Applications - IPDU Power Mgmt. - Outlet Groups Ctrl to
view the status of outlet groups and turn power off and then on again for an entire group of outlets.
NOTE: Outlet groups can be defined under PMD Configuration - Outlet Groups.
Figure 6.3: Expert - Applications - IPDU Power Mgmt. - Outlet Groups Ctrl
The same icons shown in Table 6.2 on page 37 appear on this screen.
NOTE: The Cycle button only can be used to turn power on and off for a group of outlets when all the outlets are
on.
Applications - IPDU Power Mgmt. - View IPDUs Info
An administrator can select Expert - Applications - IPDU Power Mgmt. - View IPDUs Info to view
information about each IPDU controlled by the console server. The Clear Max Detected Current
button resets the maximum detected current value. The Clear Max Detected Temperature button
resets the maximum detected temperature value.
Figure 6.4: Expert - Applications - IPDU Power Mgmt. - View IPDUs Info
To Next Page
Loading...
