44 Cyclades ACS 5000 Installation/Administration/User Guide
Specify groups of outlets using the following format:
IPDU_ID[outlets]
Where IPDU_ID is the name configured for the IPDU (such as ilA) and outlets are numbers
separated with commas or with dashes (to indicate a range), as in the following example:
ilA[1,2,5-15]
You can assign outlets from more than one IPDU to a group by using commas to separate them.
The following example defines an outlet group for two IPDUs, one named ilA and the other ilB:
ilA[1,5-8],ilB[1,3,4]
For more information, see Conventions used to identify outlets on page 8. See also Expert -
Applications - PMD Configuration on page 42 to find out the IPDU ID.
To configure an outlet group:
1. Click the Add button. The Add/Edit Outlet Groups dialog appears.
2. In the Group field, enter the name of the group you want to add, or to edit the existing name.
3. In the Outlets field, add the IPDU ID followed by the specific outlets to assign to the group in
brackets. For example, i1A[1,5-8] creates a group of outlets numbered 1, 5, 6, 7 and 8 on IPDU
ID ilA. You can assign more than one IPDU to the group, with a comma between each IPDU.
4. Click OK.
To delete an outlet group:
1. Click the Delete button.
2. Select the group name you want to delete.
3. Click OK.
Applications - PMD Configuration- Users Management
An administrator can select Expert - Applications - PMD Configuration - Users Management to
configure users to access outlets.
Figure 6.8: Expert - Applications - PMD Configuration - Users Management Screen
To Next Page
Loading...
