Avocent Cyclades ACS 5000 - Ports - Physical Ports - General; Figure 9.1: Expert - Ports - Physical Ports

70 Cyclades ACS 5000 Installation/Administration/User Guide
Figure 9.1: Expert - Ports - Physical Ports
To select one or more serial ports:
1. Select Expert - Ports - Physical Ports. The Physical Ports screen appears.
2. To select a port or ports, perform one of the following steps.
a. To select a single port, click the port.
b. To select multiple ports in a range, select the first port and then hold down the
Shift key
while selecting another port or ports.
c. To select multiple ports that are not in a range, select the first port in the list and then hold
down the
Ctrl key while selecting another port.
To enable or disable serial ports:
1. Select Expert - Ports - Physical Ports. The Physical Ports screen appears.
2. To enable selected ports, click Enable Selected Ports.
3. To disable selected ports, click Disable Selected Ports.
4. Click Done.
5. Click apply changes.
Ports - Physical Ports - General
When an administrator selects Expert - Ports - Physical Ports, selects one or more ports and clicks
the Modify button, the General screen appears.