58 Cyclades ACS 5000 Installation/Administration/User Guide
The following figure shows the fields and menus that appear when the Network route type is
selected from the Route pull-down menu.
Figure 7.13: Expert - Static Routes Add and Edit Dialog Boxes - Network Route
The following figure shows the fields and menus that appear when the Host route type is selected.
Figure 7.14: Expert - Static Routes Add and Edit Dialog Boxes - Host Route
Table 7.5: Route Type Fields in the New/Modify Route Dialog Box
Field or Menu Name Definition
Route Options are Default, Network, or Host.
Network IP Appears only when Ne
twork is selected. Enter the IP address of the
destination network.
Network mask Appears only when Ne
twork is selected. Enter the netmask of the
destination network.
Host IP Appears only when Ho
st is selected. Enter the IP address of the
destination host.
To Next Page
Loading...
