Chapter 7: Web Manager Network Menu Options 55
Figure 7.9: Expert - Network - Firewall Configuration - Input/Output Interface Fields and Fragments Menu
Options
To add a chain [Expert]:
1. Select Expert - Network - Firewall Configuration.
2. Click Add. The Add Chain dialog box appears.
3. Enter the name of the chain to be added in the Name field.
4. Click OK. The name of the new chain appears in the list.
NOTE: Spaces are not allowed in the chain name.
5. Add one or more rules to complete the chain configuration, as described in To add a rule
[Expert]: on page 55.
To edit a default chain [Expert]:
Perform this procedure if you wish to change the policy for a default chain.
NOTE: User-defined chains cannot be edited. To rename a user-added chain, delete it and create a new one.
1. Select Expert - Network - Firewall Configuration.
2. Select one of the default chains and then click the Edit button. The Edit Chain dialog box
appears.
3. Select the desired policy from the Policy pull-down menu.
4. Click OK.
5. Click apply changes.
6. To edit rules for this chain, go to To edit a rule [Expert]: on page 56.
To add a rule [Expert]:
1. Select Expert - Network - Firewall Configuration.
2. Select the chain to which you wish to add a rule from Chain list and then click the Edit Rules
button. The Edit Rules dialog box appears.
3. Click Add Rule. The Add Rule dialog box appears.
4. Select menu options, enter information in fields and select checkboxes to configure the rule.
5. Click OK.
6. Click apply changes.
To Next Page
Loading...
