INTRODUCTION
HOW TO USE THIS MANUAL
I-E96-506B1 1 - 3
understand this document before placing the power system
into service. A summary of section content follows:
Introduction
Provides an overview of the system, description of hardware,
glossary of unique terms, reference documentation, and physi-
cal and electrical specifications.
Description and
Operation
Contains a block diagram to explain how key parts of the sys-
tem operate.
Installation
Explains handling, inspection, location and safety consider-
ations, setup (e.g., switch settings) and interfacing.
Operating Procedures
Covers start-up, how to use and individual controls.
Troubleshooting
Lists error indications, corrective actions, problem determina-
tion and verification.
Maintenance
Provides guidelines to assist in establishing a preventive main-
tenance program.
Repair/Replacement
Procedures
Provides procedures for user repair and replacement.
Support Services
Explains services, training, replacement parts and warranty
policy.
Appendices
Contain quick reference material, a modular power system siz-
ing procedure, system wiring diagrams and a modular power
system retrofitting procedure.
HOW TO USE THIS MANUAL
Read this manual in sequence. To get the best use of this man-
ual, read it from cover to cover, then go back to specific
sections.
1. Read and do the steps in Section 3.
2. Read Section 4 thoroughly before powering up the system.
3. Refer to Section 5 for what to do if a problem occurs.
4. Read Section 7 if system repairs are needed.
5. Section 8 lists ordering information, training and docu-
mentation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
