Basler BE1-11g User Manual

9424200994 Rev N 655
Software
Version and Date
Change
3.01.01, Nov-12
• Added Delta/Wye Compensation Enable setting on the Distance
(21) settings screen
3.02.00, Dec-12
• Added Windows 8 compatibility
3.03.00, Mar-13
• Maintenance release
3.03.03, Jun-13
• Updated PC requirements (See the BESTCOMSPlus chapter for
more information.)
3.04.00, Aug-13
• Renamed the Trip output to Sync on the 25 logic block
• Added default fixed 0 on logic block inputs in BESTlogicPlus
• Increased Breaker Close Time setting range to 1,000 ms for the
25A element
3.04.01, Oct-13
• Maintenance release
3.05.02, Dec-13
• Added support for BE1-11g firmware version 2.07.00
• Added primary ohms conversion for 21, 40Z, and 78OOS
elements when Display Units is set to Primary
• Added a feature to reset the BE1-11g to factory defaults
3.05.03, Feb-14
• Maintenance release
3.06.00, Apr-14
• Added support for BE1-11g firmware version 2.08.00
• Added Switch/Pulse drop-down selection on the Virtual Switches
Control screen
• Changed the Download button to Refresh and added a Toggle
Sorting button on the Sequence of Events screen and Security
Log screen
Table 263. Instruction Manual Revision History
Manual
Revision and Date
Change
—, Jun-09
• Initial release
A, Aug-09
• Renamed “Neutral Current” option to “Ground Current” in Figure
1-1, Style Chart
• Updated Figure 3-25, Basler Electric Device Package Uploader
B, Oct-09
• Added Note #3 to Style Chart in Section 1 “If Phase Current
choice is 1, Ground Current choice must be B”
• Improved listing of Standards and CE Compliance in Section 1,
General Information, General Specifications
• Section 1: Added statement about an evaluation copy of
BESTWAVEPlus™ being included on the product CD
• In Section 9, changed 27 and 59 time delays from “0 or 50 to
600,000 ms” to “50 to 600,000 ms”
C, Jul-10
• Replaced Figures 13-17, 13-27, and 13-28. Added a connection
between C16 (VN) and C14 (VB)
D, Nov-10
• Added P Case Option and IEC 61850 Ethernet Protocol option
to the Style Chart in Section 1
• Added EN 61000-6-2 and EN 61000-6-4 under General
Specifications, CE Compliance in Section 1
• Added DNP Certification, IEC 61850 Certification, and IP Class
under General Specifications in Section 1
• Added Display Units in Section 4
• Added Configure Ethernet Port under Ethernet in Section 5
• Added Breaker Status, and 86 Lockout Status under Status in
Section 8
• Added Figure 13-3, H1 Panel-Mount Case Dimensions
BE1-11g Revision History

Basler BE1-11g Specifications

General

Brand	Basler
Model	BE1-11g
Category	Relays
Language	English