Basler BE1-11g User Manual

656 9424200994 Rev N
Manual
Revision and Date
Change
E, Mar-11
• Replaced Figure 3-13, Auto Export Metering (Added Filter button
on screen)
• Replaced Figure 13-18, Voltage Sensing, Alternate VTP Inputs
(Added connection between C14 & C16 in image B)
F, Sep-12
• Converted manual into new style and structure
• Added support for BE1-11m firmware version 2.06.00 and
BESTCOMSPlus version 3.00.02
G, Nov-12
• Added description of Delta/Wye Compensation Enable setting
and replaced Figure 84, Distance Settings Screen in the
Distance Protection (21) chapter
• Added Storage statement in the Quick Start chapter
• Minor text edits throughout manual
H, Jan-13
• Improved the 87N element equations and test procedure
• Improved the 40Z element test procedure
• Added case overlap in Figure 183, J Type Case - Cutout and
Drilling Dimensions in the Mounting chapter
• Added optional second set of CTs in Figure 204
• Added drawings in the Power System Applications chapter
• Added Storage statement in the RTD Module chapter
I
• This revision letter not used
J, Mar-13
• Added 10-Second Frequency description in the Power Quality
chapter
• Added Figure 206, Single-Phase Current Sensing Connections
in the Typical Connections chapter
• Added Specifications - 25 Hz Operation chapter
• Added Digital Points chapter
K, Dec-13
• Added support for BE1-11g firmware version 2.07.00 and
BESTCOMSPlus version 3.05.02
• Moved revision history to the back of the manual
• Added description of QR code in Tables 2 and 3
• Added QR code in Figures 2, 23, and 24
• Updated PC requirements for BESTCOMSPlus software
• Moved Frequently Asked Questions from the Troubleshooting
chapter into a new chapter
• Added Table 11, Common System and Sensing Transformer
Combinations for the 25 element
• Corrected trip circuit monitor jumper illustration
L, Feb-14
• Removed product registration information
M, Apr-14
• Added support for BE1-11g firmware version 2.08.00 and
BESTCOMSPlus version 3.06.00
• Added a Stator Ground (64G) Protection chapter
• Added Step 2 and updated Step 3 under Element Operation,
Control of Virtual Control Switches in the Virtual Control
Switches (43) chapter
• Added total height to the H1 Panel-Mount Case Dimensions
figure in the Mounting chapter
• Added Offline Logic Simulator description in the BESTlogicPlus
chapter
• Changed the order of the Inverse Overcurrent (51) curves in the
Time Curve Characteristics chapter
Revision History BE1-11g

Basler BE1-11g Specifications

General

Brand	Basler
Model	BE1-11g
Category	Relays
Language	English