Design
Instruction handbook b maXX BM5500, BM5600, BM5700
Document No.: 5.13008.10 Baumüller Nürnberg GmbH
122
of 314
4.1
BM5700 BM5700 (continuous current units) are servo converters especially developed for main
drives, derived from BM5500. The devices were developed to maximize the available rat-
ed current by water cooling. For this reason these devices are only available with water
cooling (cooling type -F and -Z) and with none peak current (only BM5773 with low peak
current).
Controller unit The power unit is controlled by the controller unit. You can operate the controller part with
ProDrive or via a PLC or via a field bus and PLC.
NOTE!
Only the operation with ProDrive is described. If the software is not available, please
contact Baumüller Nürnberg GmbH or visit our Website www.baumueller.de for
download.
To Next Page
Loading...