Mounting
Instruction handbook b maXX BM5500, BM5600, BM5700
Document No.: 5.13008.10
151
of 314
6
6.3 Mounting instructions
There are different kinds of mounting.
Each mounting method is shown in a graphic (refer to ZFigure 72– on page 152 to ZFig-
ure 75– on page 155).
The screws and washers required for mounting are listed beneath the respective graphic.
Carry out mounting as follows:
1 Provide suitable transport/lifting equipment as needed.
2 Keep suitable fastening components readily available.
3 For cold plate devices:
n Check the surface quality of device’s rear panel/mounting plate, refer to ZRequire-
ments mounting plate for cold plate– on page 158.
4 Mount the device.
5 Subsequently connect the water-cooling unit
To Next Page
Loading...