Baumuller b maXX 5500 - Transport Inspection; Unpacking; Disposal of the Packaging

Transport inspection
Instruction handbook b maXX BM5500, BM5600, BM5700
Document No.: 5.13008.10 Baumüller Nürnberg GmbH
140
of 314
5.3
5.3 Transport inspection
Upon receiving the delivered goods, immediately examine them for completeness and
transport damage.
If there is outwardly visible transport damage, proceed as follows:
m Do not accept the delivery or conditi
onally accept it with reservations.
m Note the extent of the damage on the transport do
cuments or on the delivery note of
the transport agent.
m Immediately file a complaint with the freight
carrier. Have the complaint confirmed in
writing and immediately contact the responsible representative of Baumüller Nürnberg
GmbH.
5.4 Unpacking
After having received the still packaged device:
h Avoid transport shocks and hard
jolts, e.g. when putting an item down.
If no transport damage is visible:
h Open the packaging of the device.
h Verify the delivery scope based on the delivery note.
File a claim with the responsible Baumüller representative if the delivery is incomplete.
5.5 Disposal of the packaging
The packaging consists of cardboard, plastic, metal parts, corrugated cardboard and/or
wood.
h When disposing of the packaging, comp
ly with the national regulations.
NOTE!
Th
e device may not be operated if there is visible transport damage!
NOTE!
Claim each individual deficiency as soon as it has been detected. Damage claims can
only be validly asserted within the claim registration period.