Wiring diagrams
Instruction handbook b maXX BM5500, BM5600, BM5700
Document No.: 5.13008.10 Baumüller Nürnberg GmbH
170
of 314
7.11
7.11 Wiring diagrams
The connection diagrams are separated in connection diagrams for the electrical mains,
motor etc., ZPage 183– and the controller connections ZPage 193–.
NOTE!
The identifiers 1C1 and 1D1 were taken over from DIN EN 60445. 1C1 is the connec-
tion to the positive DC link cable/rail, and in the past was identified by Baumüller in
some devices as ZK+. 1D1 is the connection to the negative DC link cable/rail, and
in the past was identified by Baumüller in some devices as ZK+.
To Next Page
Loading...