Baumuller b maXX 5500 - Drilling Patterns; Drilling Patterns BM551 X

Mounting
Instruction handbook b maXX BM5500, BM5600, BM5700
Document No.: 5.13008.10
145
of 314
6
6.2.1 Drilling patterns
Use the drilling pattern to make the necessary drill holes/cutout sections.
How to determine the required space in the control cabinet, refer to ZDimen
sions– from
page 29.
Tolerance 
specifications
Drill hole dimensioning ±0.2 mm
Dimensioning openings +1.0 mm
Relative tolerance of discretionary divisions ±0.1 mm
6.2.1.1 Drilling patterns BM551X
BM551X-S
Figure 62: Drilling pattern BM551X
NOTE!
Consider the minimum clearances for cooling when making the drill holes.
All dimensions in millimeters [mm].
Further notes refer to ZDimensions– from page 29 and ZCooling– from page 59.