Wiring diagrams
Instruction handbook b maXX BM5500, BM5600, BM5700
Document No.: 5.13008.10 Baumüller Nürnberg GmbH
188
of 314
7.11
NOTE!
The brake resistor is connected at the devices BM557X, BM577X between Ba- and
1C1. Also refer to ZFigure 82– on page 171.
DANGER!
Risk of fatal injury from electrical current!
Therefore:
After attaching all power cables to the device BM557X and BM577X, screw on the
cover careful to all screwing points by using the enclosed screws (6xM4x12) and
washers. The cover only must be able to be removed from the device with use of
tools.
The use of semiconductor fuses is obligatory at the power supply connection of
BM557X, BM577X devices. Semiconductor fuses are required in the brake resistor
circuit except the user assures the short-circuit protection of resistor and cable.
To Next Page
Loading...