Baumuller b maXX 5500 - Page 239

Troubleshooting and fault correction
Instruction handbook b maXX BM5500, BM5600, BM5700
Document No.: 5.13008.10
239
of 314
10
Encoder 2 Cable break - X X X
3)
Cable break (SIN² + COS²) - X X X
3)
Excessive rotational speed - X X X
3)
Cyclical specified value
transmission to the fieldbus
Time-out during transmission - X X X
3)
Blockage monitoring Drive blocked - X X - X
Signal bus Feed-in ready-to-operate X X - X -
Phase failure X X - X -
Brake resistance on X X - X -
Malfunction X X - X -
Signal bus warning X X - X -
Monitoring function Warning/error
Warning Error Adjustable threshold Adjustable reaction Reaction pulse inhibit
1)
Pulse inhibit carried out after a set time interval
2)
Only if KTY/PT1000 sensor used
3)
Adjustable
X: Implemented
-: Not possible