Baumuller b maXX 5500 - Page 247

Accessories and Spare Parts
Instruction handbook b maXX BM5500, BM5600, BM5700
Document No.: 5.13008.10
247
of 314
11
4)
Connection lugs (current bars). Position refer to ZFigure 93– on page 184 .
Screw maximum two cable lugs to the current bar - one on the front side, one on the reverse
side of the bar.

5)
Connection lugs (current bars). Position refer to ZFigure 93– on page 184
Screw maximum two cable lugs to the current bar - one on the front side, one on the
reverse side of the bar.

6)
Connection lugs (current bars). Position refer to ZFigure 96– on page 187

At connection cross-section 95 mm
2
, cable lug width max. 25 mm:
Screw maximum two cable lugs to the current bar - one on the front side, one on
the reverse side of the bar.

At connection cross-section 185 mm
2
, cable lug width max. 35 mm:
Screw two cable lugs to the current bar at maximum- one on the front side, one on
the reverse side of the bar.
