Accessories and Spare Parts
Instruction handbook b maXX BM5500, BM5600, BM5700
Document No.: 5.13008.10
265
of 314
11
SIE The connection cable is not offered by Baumüller and must be made by the user:
1 Use the following materials:
m Cable: LiYCY 2 x (2 x 0.14 mm²) + 1 x 0,34 mm² Cu braiding.
m Sub-D connector: 9-pole, female (SIE side)
m Cables must be of twisted pair wire (track DAT+/DAT-, CLK+/CLK-) from SSI encod-
er emulation to further master control systems
2 Connect
m the cable shield with the plug shell of the Sub-D male/Sub-D female connector
m the 9-pole female connector (SIE side) with the cable
To Next Page
Loading...