Baumuller b maXX BM3400 Series - Page 125

Error detetion 8.4T
• Select from the list „Drive management“.
In the figure below you see a „Drive manager“ window with several exemplary warnings and error messages.
The messages in this window demonstrate an internal list, b efore the communication between controller
and pc/laptop with WinBASSII begins, which is arranged according to the error numbers. After take-up of
communication the newly occurr ing messages are a dded onto the end of the list.
Figure 8.3: Drive manager with error messages
For the error treatment with superimposed control it is important, that the error messages in the system is
hierarchically structured (see «Structure of the error list - survey of the err or parameter names» from page
126). An error message can result from a beneath in the hierarchic arranged error message. This is why the
message SysError1 (level 1) can base on an error, which e. g. occured in ModuleError (level 2), because in the
FunctionModule1 (level 3, e. g. Sincos encoder module) a defect has occured. This is why y ou always have to
track an error to the lowest level, in order to detect/remove it.
Instrution Manual b maXX ® BM3400 125
Doument No.: 5.07013.03 from 206