Baumuller b maXX BM3400 Series - Page 184

T D App endix D - Tehnial data
10)
Maximal value to be expected at fully equipped device (with extenderboard and 2 connected encoders). If
no extenderboard is installed and only 1 encoder is used, the value to be expected is lower acc ordingly.
11)
For asynchronous machines the following have to be applied: The output frequency must not exceed a
maximum of 10% of the adjusted PWM frequency.
output current
180 V 400 V 528 V
100 %
mains supply
1
42 %
Figure D.3: Output current
output voltage
180 V 400 V 528 V
508 V
mains supply
2
160 V
380 V
Figure D.4: Output voltage BM34XX_L3
output power
180 V 400 V 528 V
100 %
P
nom
mains supply
45 %
cont. operation
allowed
3
Figure D.5: Output power BM34XX_L3
184 Instrution Manual b maXX ® BM3400
from 206 Doument No.: 5.07013.03 Baumueller Kamenz GmbH