Training of the p ersonnel 2.8T
Qualified personnel (specialists) are d efined as follows:
Qualified personnel From Baumüller Kamenz GmbH authorized electronic engineers and
skilled persons of the customer or third persons, who have learned the
installation and commissioning of Baumüller drive systems and who are
authorized, to put circuits and devices into operation according to the
standards of the safety technology, to ground and to label. Qualified
personnel has been trained or instructed in accordance w ith recognized
safety standards in the care and use of appropriate safety equipment.
Requirements to the
operating perso nnel
The operating of the drive system must only be executed by persons, who
have had a training, who have been instructed and who have been
authorized for this. Troubleshooting, servicing, cleaning, maintenance and
replacement must only be carried out by trained or instr ucted personnel.
These persons must be familiar with the manual and act in accordance with
this. Commissioning and instruction must only be carried out by qualified
personnel.
Instrution Manual
b maXX
®
BM3400
25
Doument No.: 5.07013.03 from 206