Baumuller BM4400 - Page 129

Design and Operation
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07
129
of 358
4
BM4XXX - XXX - XXXXX[Ryy] - [XXXXXXXX] - [XXX] - XX
ES controller function module, position H
00
10
20
30
50
51
52
53
54
55
60
61
62
80
90
No option module
Sercos slave, standard see
Profibus slave, standard see
CANopen slave, standard
PLC, standard, MC, without flash see
PLC, standard, MC, 4 MB flash
PLC, local, without MC, only for slave option
modules, without NOVRAM, Runtime license,
standard
PLC, Local, without MC, only for slave option
modules, 56 kB NOVRAM, Runtime license, 
standard
PLC, standard, option licensing right TechLib
PLC, standard, option coated, without licensing
right
EtherCAT for controller, SoE, special 16 bit RFG
EtherCAT for controller, CoE, standard
EtherCAT for controller, SoE, standard
VARAN slave see
POWERLINK controlled node see
BM4-O-SER-XX
BM4-O-PRO-XX
BM4-O-CAN-XX
BM4-O-PLC-XX
BM4-O-ETH-XX
BM4-O-VAR-XX
BM4-O-PLK-XX
BM4XXX - XXX - XXXXX[Ryy] - [XXXXXXX] - [XXX] - XX Safety functionality option
S01 Safety function STO
BM4XXX - XXX - XXXXX[Ryy] - [XXXXXXX] - [XXX] - XX Software release controller (firmware)
01
03
Serial version 1.x
Serial version 3.x
NOTE!
A device with safety relay, whose part number does not start with „06“, does not ap-
ply as a safety device as defined by the PL classification according to ISO 13849 or
SIL according to EN 61800. This device is not certificated for safety functions
Devices with the approval mark of TÜV Rheinland and the Safety label provide a cer-
tified safety function, only, refer to ZPage 29–.