Display and operation elements
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07 Baumüller Nürnberg GmbH
134
of 358
4.7
Current limit
H3
Error
H4
LED doesn’t light up: the internal monitoring have not found an error.
red: set current limit of the controlled has been reached.
m adapt your threshold or set „no reaction“
red, continuously: Error.
m Identify and then remove the error with help of the
operating program ProDrive or the 7-segment display.
For further information see ZTroubleshooting and fault
correction– from page 229.
red, flashing: Warning
m Identify the warning with help of the operating program
ProDrive.
Warning messages do not affect the operation of the
device.
For further information see ZTroubleshooting and fault
correction– from page 229
To Next Page
Loading...
