Device Description
Page 4 Auto Syringe AS50 Infusion Pump Operator’s Manual 07-19-B3-430
The selected options can easily be reviewed and the chosen configuration can be
changed to meet new or different requirements.
The pump operates on an internal rechargeable battery pack and can also be operated
while attached to a “900-Series” battery charger (model number CAS40-01-900) or to a
Multi-Charger (product code 1M8563).
The pump is supplied with a pole clamp and a built-in IV pole loop. The pump can also be
used on a tabletop.
Information on writing custom software for the pump is available in the Auto Syringe AS50
Infusion Pump Programmer’s Manual. Information on troubleshooting and repair of the
pump is available in the Auto Syringe AS50 Infusion Pump Service Manual.