1 695 106 288 2013-10-30| Beissbarth GmbH
30 | MS 63 | Initial commissioningen
4.4 Electrical connection
1. Check the correspondence of the mains tension and
the tension shown on the identification tag.
2. Ask a qualified electrician to mount a connection
plug for single-phase or (depending on the tension
you have ordered ) three-phase current (see the
electrical connections diagram inside the electrical
panel).
i The costs of arranging a mains protection device for
the plug are borne by the customer.
3. Protect the MS 63 according to specific national rules.
4.5 Check rotation direction
!
For a correct functioning of MS 63 it is extremely
important that, when the locking flange pedal shown
in Fig. 2 (1) is pressed, the locking flange (Fig. 2)
rotates clockwise.
652012-14_Mi
1
Fig. 2: Check rotation direction.
To Next Page
Loading...
