Drive Chain
Checking the Slackness of Drive Chain
•See “Regular Maintenance”—“Checking the Slackness of Drive
Chain”.
Checking the Slackness of Drive Chain
•See “Regular Maintenance”—“Adjusting the Slackness of Drive
Chain”.
Checking / Adjusting Wheel Alignment
•See “Regular Maintenance”—“Checking Wheel Alignment”.
Checking the Wear of Drive Chain
•See “Regular Maintenance”—“Checking the Wear of Drive Chain”.
Lubrication of Drive Chain
•See “Regular Maintenance”—“Checking the Lubrication of Drive
Chain”.
Disassembling Drive Chain
•Disassemble drive chain cover screw [A] and drive chain cover [B].
○Disassemble drive chain cover from the swing arm.
•Disassemble:
Drive sprocket locking nut [B]
Engine drive sprocket [C] (see “Disassembling Engine Drive
Sprocket”),
•Disassemble:
Drive chain [A]
•The drive chain used for this chain is equipped with the master link
of safety side plate.
•Depending on the chain manufacturer’s specifications and the type
required.
•Use special tools. There are three tools to remove the main chain
plate [A], assemble side plate [B], and fasten it to the pin at side
plate [C]
6-27
To Next Page
Loading...
