Benelli TNT 25 User Manual

Technical Parameters
Item
Standard
Front shock absorber (each one)
Diameter of front shock absorber inner pipe
Pressure
Front shock absorber oil:
Viscosity
Oil quantity
Front shock absorber oil level
Free length of front shock absorber spring
41mm
Atmospheric pressure (unadjustable)
32# shock absorber oil
28.8-35.2
440±5ml (after the disassembly, the oil has been drained completely)
80±2ml (fully compressed, without front shock absorber spring: at the top
of inner pipe)
30 mm (lower Service Limit: 296mm)
Rear shock absorber
Spring prepressing setting:
Standard
Applicable scope
Double-nut adjustment
Spring length: 192mm
Spring length: 200-192mm
(From weak to strong)
6-57

Benelli TNT 25 Specifications

General

Displacement	249 cc
Bore x Stroke	72 mm x 61.2 mm
Compression Ratio	11.2:1
Max Torque	21.61 Nm @ 8000 rpm
Transmission	6-speed
Starting System	Electric
Clutch	Wet multi-plate
ABS	No
Front Tire	110/70-17
Rear Tire	150/60-17
Length x Width x Height	2080 mm x 810 mm x 1125 mm
Seat Height	780 mm
Kerb Weight	159 kg
Fuel System	Fuel Injection
Ignition	Digital
Front Suspension	Telescopic forks
Rear Suspension	Mono-shock
Front Brake	Disc
Rear Brake	Disc
Engine Type	Single cylinder, 4-stroke, liquid-cooled, DOHC